Home » Products » Partial Discharge Measurement Device

Fully Automatic Capacitance and Inductance TesterZC-800

The ZC-800 Fully Automatic Capacitance and Inductance Tester was specifically developed to address the challenges encountered when measuring the capacitance values of individual capacitors within parallel capacitor banks at substation sites. It specifically resolves the following issues:
① On-site measurement of individual capacitors typically requires disconnecting the connecting wires—a process that is not only labor-intensive but also carries a high risk of damaging the capacitors.
② The low output voltage of standard capacitance meters often results in a low fault detection rate.
③ The need to measure the inductance of reactors. This instrument features minimal workload, rapid and simple operation, stable performance, high measurement accuracy, and a high fault detection rate.

Send inquiry

Features and Advantages

1. Automatic range switching;

2. Storage capacity for 7,168 test data points;

3. Large-screen LCD display (320×240) with Chinese-language menus and operational prompts;

4. Simultaneous on-screen display of waveforms and processed measurement data, making the testing process more intuitive;

5. Includes configuration, calibration, and debugging functions.

Parameter

Capacitance Range	0.2 μF – 2,000 μF
Capacity Range	5 – 20,000 kvar
Measurement Accuracy	0.2 μF – 2 μF (Internal CT): ±1% of reading ±0.02 μF
	0.2 μF – 2 μF (Clamp Meter): ±1.5% of reading ±0.05 μF
	2 μF – 2,000 μF: ±1% of reading ±2 digits
Inductance Range	1 mH – 9.99 H
Measurement Accuracy	±1.5% of reading ±2 digits
Output Measurement Voltage	AC 26 V / 500 VA; 50 Hz
Display Method	Large-screen LCD with full Chinese character output; Panel-mounted thermal printer
Dimensions	370 × 370 × 220 mm; Weight: 16 kg
Operating Conditions	Ambient Temperature: 0°C – +40°C; Relative Humidity: ≤90%
Operating Conditions	Power Supply: AC 220 V ±10%; 50 Hz