Technical Support

What safety precautions should be taken when using electronic multi frequency devices?

:2024-04-22 14:26:58:

Before using an electronic multi frequency withstand voltage testing device, a series of safety precautions must be followed to ensure operational safety and avoid potential hazards. The following are the key safety precautions to note before using this device:

1. Electrical safety standard inspection:

Before using the device, it should be checked for compliance with relevant electrical safety standards. This includes checking the insulation performance of the device, grounding conditions, and the presence of electrical faults or damage.

If there are any abnormalities or doubts, timely maintenance or replacement should be carried out to ensure that the device is in good working condition.

2. Understanding and preparation before operation:

Before conducting the experiment, it is necessary to fully understand the basic situation and testing requirements of the equipment to be tested. This includes key parameters such as the rated voltage, capacity, and insulation level of the equipment.

Prepare all necessary testing tools and protective equipment, such as insulated gloves, insulation pads, etc.

3. Precautions during operation:

During the testing process, close attention should be paid to the working status of the device, such as changes in parameters such as voltage, current, and temperature.

If any abnormalities or malfunctions are found, testing should be stopped immediately and the cause should be identified. Testing must not continue until the issue is fixed.

4. Safety measures for high-voltage testing:

Strict safety measures must be taken during high-voltage testing, such as wearing insulating clothing, gloves, etc.

Ensure that there are no personnel approaching the testing area and set up clear warning signs.

Operators should be familiar with the safety regulations for high-voltage testing and undergo professional training.

5. The impact of environmental factors:

During the operation, the influence of environmental factors such as temperature and humidity on the test results should be considered. If conditions permit, these factors should be controlled within an appropriate range.

6. Follow the user manual:

Before using the device, carefully read its user manual to understand the correct operating methods and precautions.

Follow the operating steps and parameter settings in the manual to avoid equipment damage or personal injury caused by misoperation.

7. Regular maintenance and testing:

Regularly maintain and inspect the device to ensure it is in good working condition. This includes cleaning equipment, checking connection lines, testing various functions, etc.

By following these safety precautions, the safety and reliability of using electronic multi frequency withstand voltage testing devices can be maximized. At the same time, it also helps to improve the accuracy and effectiveness of test results.


The induced voltage withstand test of transformers and transformers is an important test to ensure that product quality meets national standards. The longitudinal insulation induced voltage withstand test between turns, layers, segments, and phases of transformer windings is an important item in transformer insulation testing. The longitudinal insulation test requires the use of a frequency doubling power supply device to apply a test voltage and conduct a withstand voltage test. The ZC-506 multi frequency induction withstand voltage test device is controlled by a microcomputer, designed and manufactured using digital waveform synthesis technology and modern power electronics technology. It has higher working efficiency, stable output voltage, high measurement accuracy, and good repeatability than traditional triple frequency generators.

Kvtester Electronics Technology Co.,Ltd. is a high-tech enterprise specializing in power testing, testing, research and development, production, and sales of testing equipment. It has been engaged in the electrical testing industry for many years, and its products are of high quality. We welcome customers to come and purchase. Service hotline: 0086-27-81778799, to learn more, visit the official website:

My Site ©    Powered By Kvtester