Cable Fault Locating System
Cable Fault Detector
Cable Fault Detector
Cable Fault Detector
Cable Fault Detector
Cable Fault Detector
Cable Fault Detector

Cable Fault Detector

type:ZC-700A2
Online Service
  • Product Introduction

ZC-700A2 cable fault tester  consists of three parts: the system host, fault locator, and cable routing instrument.lt can be used to detect low resistance, high resistance, short circuit, open circuit and leakage faults of various cables And flashover fault, which can accurately detect the fault point position and cable of underground cable Length and buried path of cable. It has the advantages of accurate test, high intelligence and adaptability Wide range, stable performance, light and portable.

  • Product Parameters
Cable fault tester
Display mode12.1-inch Industrial LCD (XP operating platform)
Test distanceNot less than 60km
Storage spaceFixed 8G
Testing methodLow voltage pulse methodimpulse lightning current method direct lightning current method
Operation modeTouch mouse operation
Shortest test distance(blind area)0-5m or no blind area
ResolutionSoftware cursor 0.10m
Precise fixed point error士0.2m
Test errorThe systematic error is less than 士 1%
Instrument sampling frequency6.25MHz、12.5MHz、25MHz、50MHz、100MHz
Pulse width80ns、100ns、200ns、1μ s、2μ S (software automatic matching)
Standby timeIt can be used continuously for about 6 hours
Host weight7kg
Overall dimension180mm×300mm×400mm
Ambient temperature-20°℃~+40°℃
Relative humidlity80%
Power supply and consumptionAC 220V 士 10% not more than 15W    DC 12V (7Ah) not more than 20W
Technical index of Pathfinder
Signal frequency15KHz sine wave
Output powerPomax>100W
Output impedanceZo=ZC (cable characteristic resistivity)
Oscillation modeIntermittently
Ambient temperature-10°℃~+40°℃
Relative humidlityRH<85%(25℃℃)
Host weight9.8kg
Overall dlimension180mm×300mm×400mm
Fixed point instrument parameters
Dgitaldispy distanceMaximum 500m, minimum 0.1M
Rough measurement errorLess than 10%,and the fixed-point error is zero
Sensitivity of electromagnetic channel receiver<5μV
Electromagnetic channel gain>110dB
Audio amplifier gain<120dB (1 million times when signal-to-noise ratio is 4:1) 50Hz
Power frequency suppression system>40dB(100x))
High frequency and high voltage power supply parameters
Output modePulse output, DC output
Output voltageNegative pressure,0~-35kV,continuously adjustable
Working current<40mA
Working modeBuiltincapacitanceofsinglepulse,continuouspulseandDCoutput:2uF/35k(4uf/35kV)
Discharge energy≤1225J(2450J)
Pulse period3S~ 8s adaptive
Automatic dischargeAutomatic discharge after shutdown
Working power supplyPower frequency 220V士 10%
Working temperature-10℃~40°℃
Working humidity<80%
Altitude≤1000m
Overall dimension478(L)*370(W)*448(H) mm
Weight<28kg


  • Product Features
      1. Multi functional, safe, fast speed and accurate. It uses LV impulse method and HV flashover method to test, can test kinds of fault of the cable, if equipped with sound locator, can accurately the position of the fault point.
      2. High precision, adopts high-speed sampling technique, A/D sampling speed is 100MHz, resolution is 1m, detection blind area is 1m.
      3. High degree of intelligence, test results auto displayed by LCD.
      4. Can store and review the waveform and parameters, these information will not loss after power off.
      5. Dual display, compare the measured waveform and normal waveform of the fault cable, benefit to further detection of the fault.
      6. With function of wave form expansion ratio, change the proportion of the waveform, expand the waveform to test.
      7. Directly display the direct distance or relative distance between fault point and measured point.
      8. Can modify the speed according different measured cable.
      9. Portable design , small in volume , with rechargeable battery, easy to carry and operate.
  • Product Picture


Please leave the product information you want to know!

My Site © www.kvtester.com    Powered By Kvtester